一、描述你遇到的问题
请详细描述问题
官方下载代码编译正常、烧录的固件显示百分百完成了，在QCOM里相互通信不了，QCOM里开发板串口日志提示 APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 3.
二、你具体做的所有步骤结果截图
第一，配置了勾选led配置500ms
第二，选择server，然后save
第三，编译
第四，烧录
第五，client端配置
然后保存、编译、烧录
三、当前开发板状态全景照片
server端板状态
client端板状态
Qcom
四、开发板串口所有日志
client
boot.
Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
APP|Debug uart init succ.
[UPG] upgrade init OK!
APP|init_sle_mac, mac_addr:0x50,0x65,0x d,0x4c,0x**,0x**,
APP|init_dev_addr, mac_addr:0x50,0x65,0x d,0x77,0x**,0x**,
xo_trim_temp_comp val:0 0
APP|AT uart init succ.
los_at_plt_cmd_register EXCUTE
los_at_radar_cmd_register EXCUTE
APP|WARNING: main_initialise::thread[9] func is null
APP|WARNING: main_initialise::thread[12] func is null
cpu 0 entering scheduler
APP|btc open
[RADAR_LOG] radar_timer_init succ
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:23, ret:0
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
server
boot.
Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
APP|Debug uart init succ.
[UPG] upgrade init OK!
APP|init_sle_mac, mac_addr:0x50,0x65,0x c,0xd4,0x**,0x**,
APP|init_dev_addr, mac_addr:0x50,0x65,0x c,0x9b,0x**,0x**,
xo_trim_temp_comp val:0 0
APP|AT uart init succ.
los_at_plt_cmd_register EXCUTE
los_at_radar_cmd_register EXCUTE
APP|WARNING: main_initialise::thread[9] func is null
APP|WARNING: main_initialise::thread[12] func is null
cpu 0 entering scheduler
APP|btc open
[RADAR_LOG] radar_timer_init succ
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:23, ret:0
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
APP|[SYS INFO] mem: used:84948, free:298048; log: drop/all[0/0], at_recv 0.
请在此处粘贴串口日志