一、描述你遇到的问题
官方DEMO的1V8例程。Client的部分，下载打印了[SLE Client] sle enbale fail
二、你具体做的所有步骤结果截图
三、开发板串口所有日志
[16:56:26.067]收←◆boot.
[16:56:26.114]收←◆Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
[16:56:26.198]收←◆SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
[16:56:26.676]收←◆APP|dbg uart init ok.
[UPG] upgrade init OK!
APP|init_sle_mac, mac_addr:0x50,0x5b,0x15,0xb2,0x**,0x**,
APP|init_dev_addr, mac_addr:0x50,0x5b,0x15,0x53,0x**,0x**,
xo_trim_temp_comp val:0 0
los_at_plt_cmd_register EXCUTE
APP|thread[11] func null
cpu 0 entering scheduler
[16:56:26.764]收←◆APP|btc open
[RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:22, ret:0
[16:56:30.694]收←◆xo update temp:3,diff:0,xo:0x3083c
[16:56:31.815]收←◆[SLE Client] try enable.
[ACore] sle enable cbk in, result:0
sle enable: 0.
sle enable
sle_uart_client_task running..
[16:56:36.825]收←◆[SLE Client] try enable.
[SLE Client] sle enbale fail:0x80006004
[16:56:37.805]收←◆APP|[SYS INFO] mem: used:93084, free:272264; log: drop/all[0/0], at_recv 0.
[16:56:40.695]收←◆xo update temp:4,diff:0,xo:0x3083c
