一、描述你遇到的问题
在做蓝牙client开发，使用官方原版demo，编译烧录都成功，但是初始化失败，蓝牙功能用不了，不清楚是什么原因。而且，每次开机都会提示Flash Init Fail! ret = 0x80001341，这个表示是什么问题呢？
二、你具体做的所有步骤结果截图
三、当前开发板状态全景照片
请插入图片
四、开发板串口所有日志
boot.
Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
APP|dbg uart init ok.
[UPG] upgrade init OK!
APP|init_sle_mac, mac_addr:0x50,0x56,0x12,0x2a,0x**,0x**,
APP|init_dev_addr, mac_addr:0x50,0x56,0x12,0xb9,0x**,0x**,
xo_trim_temp_comp val:0 0
los_at_plt_cmd_register EXCUTE
APP|thread[11] func null
cpu 0 entering scheduler
APP|btc open
[RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:22, ret:0
ble_uart_client_task entry.[ACore] ble enable cbk in, event:b
ble enable: 0
[SLE Client] try enable1.
[ble uart client error] enable_ble ret = 80006000
[ble uart client error] init failed ret = 80006000
ble enable end: 0
[ble uart client] set scan param status: 0
xo update temp:3,diff:0,xo:0x30014
APP|[SYS INFO] mem: used:97712, free:268260; log: drop/all[0/0], at_recv 0.
xo update temp:4,diff:0,xo:0x30014