技术支持提问请严格按照以下格式提供对应信息，否则会影响回复时效，一定要描述清楚，以免一次回复无法解决问题
（提问前请先自查自己是否很仔细看过教程了，教程中的每句话都很重要，教程都是经过验证的，不会有问题的）
一、描述你遇到的问题
在一个server添加第二个service失败，再注册一个server也注册不了
二、你具体做的所有步骤结果截图
三、当前开发板状态全景照片
请插入图片
四、开发板串口所有日志
boot.
Flashboot Init!
Power On
Reboot cause:0xF0F0
Reboot count:0x0
Reboot count:0x0
Flash Init Succ!
No need to upgrade...
Jump to app! addr = 0x90115300
Debug uart init succ:80000
version: BS2X 1.0.11
This sdk only for BearPi_Pico H2821 development board !
Powered by www.bearpi.cn
cpu 0 entering scheduler
LOS_QueueCreate queueId 0
LOS_QueueCreate queueId 1
bt at register ret = 80000005
bt at register ret = 80000005
[pm_sys]pm_sys_entry.
[ACore] ble enable cbk in, event:b
ble enable: 0
[GAP service register][device name] handle: 0x0006, value handle: 0x0007
[GAP service register][device appearance] handle: 0x0008, value handle: 0x0009
[GAP service register][prefer conn param] handle: 0x000a, value handle: 0x000b
XXXXXXXXXXXX add service YYYYYYYYYYYYYYYYY
XXXXXXXXXXXX add service failed failed failed failed
XXXXXXXXXXXX add service failed failed failed failed
XXXXXXXXXXXX add service failed failed failed failed
[ble uart server error] add server failed
[ble uart server] start service: 1 service_hdl: 1 status: 0
[ble uart server] start service: 1 service_hdl: 5 status: 0
[ble uart server] add characters_and_descriptors cbk service:1, srv_handle:14, uuid_len:2, status:0, uuid:00 0a
[ble uart server] HID Information characters:1 srv_handle:14
[ble uart server] characters_uuid:2a 4a
[ble uart server] add character cbk service:1 service_hdl: 14 char_hdl: 15 char_val_hdl: 16 uuid_len: 2
uuid:2a 4a [ble uart server] status:0 indicate_handle:0
[ble uart server] start service: 1 service_hdl: 14 status: 0
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
