一、描述你遇到的问题
H63无法烧录
二、你具体做的所有步骤结果截图
就是用ch340往模块烧固件，模块的vcc接的也是ch340的5v，烧录的时候921600，600000和115200波特率都试过了
拔vcc和gnd重启，和短接重启都试过了，都下不进去一直显示等待重启
三、当前开发板状态全景照片
四、开发板串口所有日志
请在此处粘贴串口日志
boot.
Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
flashboot version : 1.10.101
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
APP|Debug uart init succ.
[UPG] upgrade init OK!
APP|init_dev_addr, mac_addr:0x75,0x 0,0x73,0x54,0x**,0x**,
xo_trim_temp_comp val:0 0
APP|AT uart init succ.
los_at_plt_cmd_register EXCUTE
APP|WARNING: main_initialise::thread[10] func is null
cpu 0 entering scheduler
APP|btc open
[RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
device_main_init: 0!
===hal_initialize_phy===225===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:24, ret:0
