一、描述你遇到的问题
使用1对8透传，SLE client最多一包只能接收到248字节，SLE server一包可以接收更多字节，请教下是什么原因，是不是client一包就只能接收这么多
二、你具体做的所有步骤结果截图
三、当前开发板状态全景照片
请插入图片
四、开发板串口所有日志
client日志:
boot.
Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
APP|dbg uart init ok.
[UPG] upgrade init OK!
APP|init_sle_mac, mac_addr:0x50,0x5b,0x19,0x79,0x**,0x**,
APP|init_dev_addr, mac_addr:0x50,0x5b,0x19,0x 8,0x**,0x**,
xo_trim_temp_comp val:0 0
los_at_plt_cmd_register EXCUTE
APP|thread[11] func null
cpu 0 entering scheduler
APP|btc open
[RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:22, ret:0
[SLE Client] try enable.
[ACore] sle enable cbk in, result:0
sle enable: 0.
sle enable
[SLE Client] try enable.
[SLE Client] sle enbale fail !
xo update temp:4,diff:0,xo:0x30000
[adv_report] event_type: 0x03, addr_type: 0x0000, addr: 01::::05:01
[adv_report] data length: 6, data: 0x01 0x02 0x01 0x02 0x02 0x00
[adv_report] event_type: 0x0b, addr_type: 0x0000, addr: 01::::05:01
[adv_report] data length: 20, data: 0x0c 0x02 0x0a 0x10 0x0b 0x73
sle_sample_seek_result_info_cbk [01,02,03,04,05,01]
sle_sample_seek_result_info_cbk
sle_sample_seek_result_info_cbk [01,02,03,04,05,01]
sle_sample_seek_result_info_cbk
sle_uart_server
will connect dev
sle_sample_seek_result_info_cbk [01,02,03,04,05,01]
sle_sample_seek_result_info_cbk
[Connected]
addr:01:::**:05:01, conn_id:00
[sle uart client] conn state changed disc_reason:0x0
[sle uart client] SLE_ACB_STATE_CONNECTED
ssapc exchange info, conn_id:0, err_code:0
[sle uart client] exchange_info_cbk,pair complete client id:0 status:0
[sle uart client] exchange mtu, mtu size: 520, version: 1.
discovery character cbk in
discovery character cbk complete in
[sle uart client] sle_uart_client_sample_find_property_cbk, client id: 0, conn id: 0, operate ind: 9, descriptors count: 1 status:0 property->handle 2
[sle uart client] sle_uart_client_sample_find_structure_cmp_cbk,client id:0 status:0 type:3 uuid len:0
sle uart recived data : 01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567
01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567
server日志:
boot.
Flash Init Fail! ret = 0x80001341
verify_public_rootkey secure verify disable!
verify_params_key_area secure verify disable!
verify_params_area_info secure verify disable!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
APP|dbg uart init ok.
[UPG] upgrade init OK!
APP|init_sle_mac, mac_addr:0x50,0x5b,0x19,0x4d,0x**,0x**,
APP|init_dev_addr, mac_addr:0x50,0x5b,0x19,0xd3,0x**,0x**,
xo_trim_temp_comp val:0 0
los_at_plt_cmd_register EXCUTE
APP|thread[11] func null
cpu 0 entering scheduler
APP|btc open
[RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:22, ret:0
[ACore] sle enable cbk in, result:0
sle enable
[sle uart server] sle uart add service in
[sle uart server] sle uart add service, server_id:1, service_handle:1, property_handle:2
[sle uart server] start service cbk callback server_id:1, handle:1, status:0
[sle uart server] sle uart add service out
[sle uart server] sle_uart_local addr: 0x01 0x02 0x03 0x04 0x05 0x01
[ACore] sle set announce param, handle:1, mode:3, min_interval:c8, max_interval:c8, tx_power: 18
[ACore] sle set announce param, own addr:0x01::::05:01
[ACore] sle set announce param, peer addr:0x00::::00:00
[sle uart server] data.announce_data_len = 6
[sle uart server] data.announce_data: 0x01 0x02 0x01 0x02 0x02 0x00
[sle uart server] local_name_len = 15
[sle uart server] local_name: 0x73 0x6c 0x65 0x5f 0x75 0x61 0x72 0x74 0x5f 0x73 0x65 0x72 0x76 0x65 0x72
[sle uart server] data.seek_rsp_data_len = 20
[sle uart server] data.seek_rsp_data: 0x0c 0x02 0x0a 0x10 0x0b 0x73 0x6c 0x65 0x5f 0x75 0x61 0x72 0x74 0x5f 0x73 0x65 0x72 0x76 0x65 0x72
[sle uart server] set announce data success.
[ACore] sle start announce in, adv_id:1
[ACore] sle adv cbk in, event:0 status:0
[ACore] sle adv cbk in, event:1 status:0
[ACore] sle adv cbk in, event:2 status:0
[ACore] sle adv cbk in, event:3 status:0
[sle uart server] sle announce enable callback id:01, state:0
[sle uart server] init ok
[Connected]
addr:ee::::8d:5c, conn_id:00
[ACore] sle adv cbk in, event:7 status:0
[sle uart server] connect state changed callback conn_id:0x00, conn_state:0x1, pair_state:0x1, disc_reason:0x0
[sle uart server] connect state changed callback addr:ee::::8d:a13f74
[sle uart server] sle announce terminal callback id:01
[sle uart server] ssaps ssaps_mtu_changed_cbk callback server_id:0, conn_id:0, mtu_size:208, status:0
xo update temp:3,diff:0,xo:0x30000
update ssap send report handle: pre handle:ffff, current:0
[sle uart server] ssaps write request callback cbk server_id:1, conn_id:0, handle:2, status:0
sle uart recived data : 01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789