一、描述你遇到的问题
H3863做客户端连接h2821e服务器，客户端扫描不到服务器的广播，用两款h3863就可以连接，用两块2821e也可以连接，请问是扫描原因。
二、你具体做的所有步骤结果截图
三、当前开发板状态全景照片
请插入图片
四、开发板串口所有日志
客户端：[2025-12-31 16:42:40.946]# RECV ASCII/136 <<<
SSB Uart Init Succ!
SSB Flash Init Succ!
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
[2025-12-31 16:42:40.996]# RECV ASCII/332 <<<
Flashboot Uart Init Succ!
Flashboot Malloc Init Succ!
Flash Init Succ!
No need to fix SR!
io level work in hw mode, level[chip]:0x33
flashboot version : 1.10.102
[UPG] upgrade init OK!
No need to upgrade...
flash_encrypt disable.
verify_image_key_area secure verify disable!
verify_image_code_info secure verify disable!
[2025-12-31 16:42:41.466]# RECV ASCII/487 <<<
APP|dbg uart init ok.
[UPG] upgrade init OK!
APP|init_sle_mac: NV MAC check failed!
APP|init_sle_mac: get MAC from EFUSE success!
0x 0,0x 0,0x 0,0x 0,0x**,0x**,
APP|init_sle_mac, mac_addr:0x 0,0x 0,0x 0,0x 0,0x**,0x**,
cd CONFIG_MIDDLEWARE_SUPPORT_NV WZK
cd CONFIG_DRIVER_SUPPORT_EFUSE WZK
APP|init_dev_addr, mac_addr:0x65,0x 0,0x73,0x32,0x**,0x**,
xo_trim_temp_comp val:0 0
los_at_plt_cmd_register EXCUTE
APP|thread[11] func null
cd sle_uart_entry
cpu 0 entering scheduler
[2025-12-31 16:42:41.622]# RECV ASCII/249 <<<
APP|btc open
[RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
device_main_init: 0!
===hal_initialize_phy===226===
device_module_init:: succ!
cali_set_cali_mask:old[0x0] -> new[0x1fa2]
fe_rf_initialize
cali_offline_cali_entry enter
[2025-12-31 16:42:41.644]# RECV ASCII/148 <<<
cali_set_cali_done_flag:old[0x0] -> new[0x1]
rf cali OK. time cost:23, ret:0
cd sle_uart_client_task
cd uapi_uart_unregister_rx_callback Wzk
[2025-12-31 16:42:42.591]# RECV ASCII/164 <<<
[SLE Client] try enable.
[ACore] sle enable cbk in, result:0
sle enable: 0.Wzk2
sle enable
sle uart_client_task end WZk
set mac SUccess WZK:00:00:73:02:03:01
[2025-12-31 16:42:43.600]# RECV ASCII/165 <<<
[SLE Client] try enable.
cd sle_uart_start_scan WZK
sle_set_seek_param ERrrCode:0
sle_start_seek ERrrCode:0
sle_uart_client_sample_seek_enable_cbk success wzk
[2025-12-31 16:42:45.460]# RECV ASCII/36 <<<
xo update temp:3,diff:0,xo:0x3083c