一、描述你遇到的问题
3863开发板sle测速如何能达到4M
二、你具体做的所有步骤结果截图
设置功率为20dBm SLE_ADV_TX_POWER 20
sle_set_phy_t phy_parm = {
.tx_format = SLE_RADIO_FRAME_2, // 发送帧格式
.rx_format = SLE_RADIO_FRAME_2, // 接收帧格式
.tx_phy = SLE_PHY_4M, // 发送PHY: 4M
.rx_phy = SLE_PHY_4M, // 接收PHY: 4M
.tx_pilot_density = SLE_PHY_PILOT_DENSITY_16_TO_1, // 发送导频密度
.rx_pilot_density = SLE_PHY_PILOT_DENSITY_16_TO_1, // 接收导频密度
.g_feedback = 0, // G反馈参数
.t_feedback = 0, // T反馈参数
};
三、开发板串口所有日志
cliant端日志：[2025-12-16_16:29:45:074][ssap client] Found device: 11:22:33:44:55:66, RSSI=-28 dBm
[2025-12-16_16:29:45:074][ssap client] Updated RSSI for device 11::66 to -28 dBm
[2025-12-16_16:29:45:105][ssap client] Scan timeout, stopping scan...
[2025-12-16_16:29:45:121][ssap client] Selecting strongest device from 1 candidates:
[2025-12-16_16:29:45:121][ssap client] Device 0: MAC=11:22:33:44:55:66, RSSI=-28 dBm
[2025-12-16_16:29:45:121][ssap client] Selected device 0 with RSSI=-28 dBm
[2025-12-16_16:29:45:136][ssap client] Connecting to strongest device...
[2025-12-16_16:29:45:228][Connected]
[2025-12-16_16:29:45:228]addr:11::::55:66, handle:00
[2025-12-16_16:29:45:228][ssap client] conn state changed conn_id:0, addr:115566
[2025-12-16_16:29:45:228][ssap client] conn state changed disc_reason:0x0
[2025-12-16_16:29:45:259][ssap client] sle_sample_update_req_cbk interval_min = 0a, interval_max = 0a
[2025-12-16_16:29:45:366][Connected param update] addr:11::::55:66, handle:00
[2025-12-16_16:29:45:366][ssap client] updat state changed conn_id:0, interval = 0a
[2025-12-16_16:29:45:447][ssap client] pair complete conn_id:0, addr:112233445566
[2025-12-16_16:29:45:447]ssapc exchange info, conn_id:0, err_code:0
[2025-12-16_16:29:45:447][ssap client] pair complete client id:0 status:0
[2025-12-16_16:29:45:447][ssap client] exchange mtu, mtu size: 512, version: 1.
[2025-12-16_16:29:45:447]discovery character cbk complete in
[2025-12-16_16:29:45:447][ssap client] find structure cbk client: 0 conn_id:0 status: 0
[2025-12-16_16:29:45:457][ssap client] find structure start_hdl:[0x01], end_hdl:[0x02], uuid len:2
[2025-12-16_16:29:45:477][ssap client] structure uuid:[0xcd][0xab]
[2025-12-16_16:29:45:477][ssap client] find structure cmp cbk client id:0 status:0 type:1 uuid len:0
[2025-12-16_16:29:45:477][ssap client] find structure cmp cbk structure uuid[0]:[0x00]
[2025-12-16_16:29:45:477][ssap client] find structure cmp cbk structure uuid[1]:[0x00]
[2025-12-16_16:29:45:488][ssap client] find structure cmp cbk structure uuid[2]:[0x00]
[2025-12-16_16:29:45:488][ssap client] find structure cmp cbk structure uuid[3]:[0x00]
[2025-12-16_16:29:45:508][ssap client] find structure cmp cbk structure uuid[4]:[0x00]
[2025-12-16_16:29:45:508][ssap client] find structure cmp cbk structure uuid[5]:[0x00]
[2025-12-16_16:29:45:508][ssap client] find structure cmp cbk structure uuid[6]:[0x00]
[2025-12-16_16:29:45:508][ssap client] find structure cmp cbk structure uuid[7]:[0x00]
[2025-12-16_16:29:45:519][ssap client] find structure cmp cbk structure uuid[8]:[0x00]
[2025-12-16_16:29:45:538][ssap client] find structure cmp cbk structure uuid[9]:[0x00]
[2025-12-16_16:29:45:538][ssap client] find structure cmp cbk structure uuid[10]:[0x00]
[2025-12-16_16:29:45:538][ssap client] find structure cmp cbk structure uuid[11]:[0x00]
[2025-12-16_16:29:45:538][ssap client] find structure cmp cbk structure uuid[12]:[0x00]
[2025-12-16_16:29:45:549][ssap client] find structure cmp cbk structure uuid[13]:[0x00]
[2025-12-16_16:29:45:549][ssap client] find structure cmp cbk structure uuid[14]:[0x00]
[2025-12-16_16:29:45:569][ssap client] find structure cmp cbk structure uuid[15]:[0x00]
[2025-12-16_16:29:45:569]ssapc write rsp handle:1
[2025-12-16_16:29:45:569][sle write_req_complete_cbk]conn_id:0, err_code:0
[2025-12-16_16:29:45:569][ssap client] write cfm cbk, client id: 0 status:0.
[2025-12-16_16:29:45:569]ssapc read rsp handle:0, data len:4
[2025-12-16_16:29:45:580][ssap client] read cfm cbk client id: 0 conn id: 0 status: 0
[2025-12-16_16:29:45:580][ssap client] read cfm cbk handle: 0, type: 10 , len: 4
[2025-12-16_16:29:45:600][ssap client] read cfm cbk[0] 0x11
[2025-12-16_16:29:45:600][ssap client] read cfm cbk[1] 0x22
[2025-12-16_16:29:45:600][ssap client] read cfm cbk[2] 0x33
[2025-12-16_16:29:45:600][ssap client] read cfm cbk[3] 0x44
[2025-12-16_16:29:45:600][ssap client] sle_sample_update_req_cbk interval_min = f6, interval_max = 6a01
[2025-12-16_16:29:46:847]g_count_after_get_us = 7967021, g_count_before_get_us = 6725792, data_len = 236
[2025-12-16_16:29:46:847]time = 1.24 s
[2025-12-16_16:29:46:862]speed = 1521072.96 bps
[2025-12-16_16:29:48:099]g_count_after_get_us = 9219519, g_count_before_get_us = 7972056, data_len = 236
[2025-12-16_16:29:48:099]time = 1.24 s
[2025-12-16_16:29:48:114]speed = 1513471.68 bps
[2025-12-16_16:29:49:349]g_count_after_get_us = 10469525, g_count_before_get_us = 9224531, data_len = 236
[2025-12-16_16:29:49:349]time = 1.24 s
[2025-12-16_16:29:49:364]speed = 1516473.12 bps
[2025-12-16_16:29:50:097]APP|[SYS INFO] mem: used:119292, free:214552; log: drop/all[0/0], at_recv 0.
[2025-12-16_16:29:50:602]g_count_after_get_us = 11719464, g_count_before_get_us = 10474577, data_len = 236
[2025-12-16_16:29:50:602]time = 1.24 s
[2025-12-16_16:29:50:602]speed = 1516603.52 bps
[2025-12-16_16:29:51:854]g_count_after_get_us = 12969545, g_count_before_get_us = 11724548, data_len = 236
[2025-12-16_16:29:51:854]time = 1.24 s
[2025-12-16_16:29:51:854]speed = 1516469.44 bps
[2025-12-16_16:29:53:105]g_count_after_get_us = 14219447, g_count_before_get_us = 12974634, data_len = 236
[2025-12-16_16:29:53:105]time = 1.24 s
[2025-12-16_16:29:53:105]speed = 1516693.76 bps
[2025-12-16_16:29:54:354]g_count_after_get_us = 15469495, g_count_before_get_us = 14224545, data_len = 236
[2025-12-16_16:29:54:354]time = 1.24 s
[2025-12-16_16:29:54:354]speed = 1516526.72 bps
[2025-12-16_16:29:55:604]g_count_after_get_us = 16719513, g_count_before_get_us = 15474597, data_len = 236
[2025-12-16_16:29:55:604]time = 1.24 s
[2025-12-16_16:29:55:604]speed = 1516568.32 bps
server端日志：
[2025-12-16_16:29:38:845]boot.
[2025-12-16_16:29:38:901]Flash Init Fail! ret = 0x80001341
[2025-12-16_16:29:38:901]verify_public_rootkey secure verify disable!
[2025-12-16_16:29:38:901]verify_params_key_area secure verify disable!
[2025-12-16_16:29:38:901]verify_params_area_info secure verify disable!
[2025-12-16_16:29:38:901]verify_image_key_area secure verify disable!
[2025-12-16_16:29:38:901]verify_image_code_info secure verify disable!
[2025-12-16_16:29:38:967]SSB Uart Init Succ!
[2025-12-16_16:29:38:967]SSB Flash Init Succ!
[2025-12-16_16:29:38:982]verify_image_key_area secure verify disable!
[2025-12-16_16:29:38:982]verify_image_code_info secure verify disable!
[2025-12-16_16:29:38:997]Flashboot Uart Init Succ!
[2025-12-16_16:29:38:997]Flashboot Malloc Init Succ!
[2025-12-16_16:29:39:016]Flash Init Succ!
[2025-12-16_16:29:39:016]No need to fix SR!
[2025-12-16_16:29:39:016]flashboot version : 1.10.101
[2025-12-16_16:29:39:016][UPG] upgrade init OK!
[2025-12-16_16:29:39:016]No need to upgrade...
[2025-12-16_16:29:39:016]flash_encrypt disable.
[2025-12-16_16:29:39:016]verify_image_key_area secure verify disable!
[2025-12-16_16:29:39:016]verify_image_code_info secure verify disable!
[2025-12-16_16:29:39:529]APP|Debug uart init succ.
[2025-12-16_16:29:39:572][UPG] upgrade init OK!
[2025-12-16_16:29:39:572]APP|init_dev_addr, mac_addr:0xd1,0x 0,0x73,0x64,0x**,0x**,
[2025-12-16_16:29:39:572]xo_trim_temp_comp val:0 0
[2025-12-16_16:29:39:572][osal_irq_request:68]:LOS_HwiCreate failed! irq[53] ret = 0x2000904.
[2025-12-16_16:29:39:572]APP|AT uart init succ.
[2025-12-16_16:29:39:572]los_at_plt_cmd_register EXCUTE
[2025-12-16_16:29:39:572][osal_msg_queue_create:36]:qName:dfx_msg qID=0x0
[2025-12-16_16:29:39:590]APP|=========FS MOUNT=========
[2025-12-16_16:29:39:590]LFS [E]:fs init failed, ret = 0xffffffff
[2025-12-16_16:29:39:590]LFS [E]:lfs_format failed, ret = -28
[2025-12-16_16:29:39:590]LFS [E]:lfs_mount failed, ret = -84
[2025-12-16_16:29:39:609]APP|=========FS READY=========
[2025-12-16_16:29:39:609]APP|WARNING: main_initialise::thread[11] func is null
[2025-12-16_16:29:39:609]hilog will init.
[2025-12-16_16:29:39:609]hievent will init.
[2025-12-16_16:29:39:609]hievent init success.
[2025-12-16_16:29:39:609]LFS [E]:lfs_file_open failed, ret = -2147483647, name = tmp_persist_parameters
[2025-12-16_16:29:39:609]LFS [E]:lfs_file_open failed, ret = -2147483647, name = persist_parameters
[2025-12-16_16:29:39:620]LFS [E]:lfs_file_open failed, ret = -2147483647, name = persist_parameters
[2025-12-16_16:29:39:636]Please implement the interface according to the platform!
[2025-12-16_16:29:39:636]cpu 0 entering scheduler
[2025-12-16_16:29:39:636][osal_msg_queue_create:36]:qName:BthChannel qID=0x4
[2025-12-16_16:29:39:636][osal_msg_queue_create:36]:qName:BtcChannel qID=0x5
[2025-12-16_16:29:39:651][osal_msg_queue_create:36]:qName:BthChannel qID=0x6
[2025-12-16_16:29:39:651][osal_msg_queue_create:36]:qName:BtcChannel qID=0x7
[2025-12-16_16:29:39:666][osal_irq_request:68]:LOS_HwiCreate failed! irq[46] ret = 0x2000904.
[2025-12-16_16:29:39:731]APP|btc open
[2025-12-16_16:29:39:731]hiview init success.
[2025-12-16_16:29:39:731][RADAR_LOG] alg ctrl read from nv [1][2][0][0][1][1][20]
[2025-12-16_16:29:39:731][osal_kthread_set_priority:70]:parameter invalid!
[2025-12-16_16:29:39:731][osal_kthread_set_priority:70]:parameter invalid!
[2025-12-16_16:29:39:731]device_main_init: 0!
[2025-12-16_16:29:39:731]===hal_initialize_phy===225===
[2025-12-16_16:29:39:731]device_module_init:: succ!
[2025-12-16_16:29:39:742]cali_set_cali_mask:old[0x0] -> new[0x1fa2]
[2025-12-16_16:29:39:742]fe_rf_initialize
[2025-12-16_16:29:39:742]cali_offline_cali_entry enter
[2025-12-16_16:29:39:773]cali_set_cali_done_flag:old[0x0] -> new[0x1]
[2025-12-16_16:29:39:773]rf cali OK. time cost:23, ret:0
[2025-12-16_16:29:40:777][ACore] sle enable cbk in, result:0
[2025-12-16_16:29:40:777]sle enable
[2025-12-16_16:29:40:777]sle enable
[2025-12-16_16:29:40:777][uuid server] sle uuid add service in
[2025-12-16_16:29:40:777][uuid server] sle uuid add service, server_id:1, service_handle:1, property_handle:2
[2025-12-16_16:29:40:798][uuid server] start service cbk server_id:1, handle:1, status:0
[2025-12-16_16:29:40:798][uuid server] sle uuid add service out
[2025-12-16_16:29:40:798]sle_uuid_server_adv_init in
[2025-12-16_16:29:40:798][ACore] sle set announce param, handle:1, mode:3, min_interval:c8, max_interval:c8, tx_power: 0
[2025-12-16_16:29:40:820][ACore] sle set announce param, own addr:0x11::::55:66
[2025-12-16_16:29:40:820][ACore] sle set announce param, peer addr:0x00::::00:00
[2025-12-16_16:29:40:820]set adv data default
[2025-12-16_16:29:40:820]local_name[0] = 0x73
[2025-12-16_16:29:40:820]local_name[1] = 0x6c
[2025-12-16_16:29:40:820]local_name[2] = 0x65
[2025-12-16_16:29:40:820]local_name[3] = 0x5f
[2025-12-16_16:29:40:839]local_name[4] = 0x75
[2025-12-16_16:29:40:839]local_name[5] = 0x61
[2025-12-16_16:29:40:839]local_name[6] = 0x72
[2025-12-16_16:29:40:839]local_name[7] = 0x74
[2025-12-16_16:29:40:839]local_name[8] = 0x5f
[2025-12-16_16:29:40:839]local_name[9] = 0x73
[2025-12-16_16:29:40:839]local_name[10] = 0x65
[2025-12-16_16:29:40:839]local_name[11] = 0x72
[2025-12-16_16:29:40:839]local_name[12] = 0x76
[2025-12-16_16:29:40:855]local_name[13] = 0x65
[2025-12-16_16:29:40:855]local_name[14] = 0x72
[2025-12-16_16:29:40:855]local_name[15] = 0xff
[2025-12-16_16:29:40:855][SLE DD SDK] set announce data success.[ACore] sle start announce in, adv_id:1
[2025-12-16_16:29:40:855][ACore] sle adv cbk in, event:0 status:0
[2025-12-16_16:29:40:885][ACore] sle adv cbk in, event:1 status:0
[2025-12-16_16:29:40:885][ACore] sle adv cbk in, event:2 status:0
[2025-12-16_16:29:40:885][ACore] sle adv cbk in, event:3 status:0
[2025-12-16_16:29:40:885]sle announce enable id:01, state:00
[2025-12-16_16:29:40:885]sle_uuid_server_adv_init out
[2025-12-16_16:29:40:885][uuid server] init ok
[2025-12-16_16:29:43:637]xo update temp:3,diff:0,xo:0x3083c
[2025-12-16_16:29:45:226][Connected]
[2025-12-16_16:29:45:226]addr:13::::00:51, handle:00
[2025-12-16_16:29:45:226][ACore] sle adv cbk in, event:7 status:0
[2025-12-16_16:29:45:226][uuid server] connect state changed conn_id:0x00, conn_state:0x1, pair_state:0x1, disc_reason:0x0
[2025-12-16_16:29:45:226][uuid server] connect state changed addr:13::::00:51
[2025-12-16_16:29:45:244]sle announce terminal id:01
[2025-12-16_16:29:45:351][Connected param update] addr:13::::00:51, handle:00
[2025-12-16_16:29:45:351][ssap server] updat state changed conn_id:0, interval = 0a
[2025-12-16_16:29:45:457][uuid server] pair complete conn_id:00, status:0
[2025-12-16_16:29:45:457][uuid server] pair complete addr:13::::00:51
[2025-12-16_16:29:45:457][uuid server] ssaps write request cbk server_id:0, conn_id:0, mtu_size:200, status:0
[2025-12-16_16:29:45:565][uuid server] ssaps write request cbk server_id:1, conn_id:0, handle:1, status:0
[2025-12-16_16:29:45:565][uuid server] Received data (4 bytes): "3D
[2025-12-16_16:29:45:585][uuid server] Unknown command received
[2025-12-16_16:29:45:585][uuid server] ssaps read request cbk server_id:1, conn_id:0, handle:1, status:0
[2025-12-16_16:29:45:585]kthread success
[2025-12-16_16:29:45:585]update ssap send report handle: pre handle:ffff, current:0
[2025-12-16_16:29:45:585][ssap server] sle_sample_update_req_cbk interval_min:f6, interval_max:6a01