按3863修改2821的一对多程序，编译报错已解决，烧录后无法连接；
主机从机均多次输出bt at register ret = 80000005，查找后发现是#define ERRCODE_MALLOC报错码，请问这个情况要如何处理？
开发板串口所有日志
主机：
LOS_QueueCreate queueId 0
LOS_QueueCreate queueId 1
bt at register ret = 80000005
bt at register ret = 80000005
[pm_sys]pm_sys_entry.
[SLE Client] try enable.
[ACore] sle enable cbk in, result:0
sle enable
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000
005
从机：
LOS_QueueCreate queueId 0
LOS_QueueCreate queueId 1
bt at register ret = 80000005
bt at register ret = 80000005
[pm_sys]pm_sys_entry.
[ACore] sle enable cbk in, result:0
sle enable
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
bt at register ret = 80000005
[sle uart server] sle uart add service in
[sle uart server] sle uart add service, server_id:1, service_handle:1, property_handle:2
[sle uart server] start service cbk callback server_id:1, handle:1, status:0
[sle uart server] sle uart add service out
[sle uart server] sle_uart_local addr: 0x01 0x02 0x03 0x04 0x05 0x01
[ACore] sle set announce param, handle:1, mode:3, min_interval:c8, max_interval:c8, tx_power: 18
[ACore] sle set announce param, own addr:0x01:**:**:**:05:01
[ACore] sle set announce param, peer addr:0x00:**:**:**:00:00
[sle uart server] data.announce_data_len = 6
[sle uart server] data.announce_data: 0x01 0x02 0x01 0x02 0x02 0x00
[sle uart server] local_name_len = 15
[sle uart server] local_name: 0x73 0x6c 0x65 0x5f 0x75 0x61 0x72 0x74 0x5f 0x73 0x65 0x72 0x76 0x65 0x72
[sle uart server] data.seek_rsp_data_len = 20
[sle uart server] data.seek_rsp_data: 0x0c 0x02 0x0a 0x10 0x0b 0x73 0x6c 0x65 0x5f 0x75 0x61 0x72 0x74 0x5f 0x73 0x65 0x72 0x76 0x65 0x72
[sle uart server] set announce data success.
[
ACore] sle start announce in, adv_id:1
[ACore] sle adv cbk in, event:0 status:0
[ACore] sle adv cbk in, event:1 status:0
[ACore] sle adv cbk in, event:2 status:0
[ACore] sle a�cbk in, event:3 status:0
[sle uart server] init ok
